Kelong Mould support for different types of plastic pail moulds manufacturing, like food pail mould, paint pail mould, lubrication oil pail mould and etc. In the market, there are different volumes pails, from 1L to 20L is very common and popular.

Today, we are talking about the mould design of bucket mould.

The design of cooling line of bucket mold should be decided by bucket size and wall-thickness. The cooling line hole is too small and the cooling is not timely, which will easily cause the mold not to cool in time, and lead to the product surface with heat corona affecting the product appearance.

Therefore, it is necessary to adopt multi-loop cooling design, which can not only allows the mold to cool down quickly but also evenly at the same time.

The structure of the bucket mold is mainly according to the design of the product. The most common bucket on the market is the circular bucket. In order to save the cost of the mold, some mold manufacturers will make the circular mold structure which will save some money on mould steel and mould processing but will reduce the quality and life of the mould. However, KELONG Mould always insisted on square mould to make sure the mold is strong enough to have the expected mold life.

So if you are interested in our Plastic Bucket Mould, welcome to contact us for more information. 

Amanda Evanism

+86-17705763693(Whatsapp/Wechat)

[email protected]

www.kelongmoulds.com