How to do the daily maintenance of injection molds?

In fact, a good injection mold needs maintenance and protection in order to increase the life of the mold and produce better products. For such large-volume products as special daily necessities molds, we spray an anti-rust agent in the mold every time we use it to prevent the mold surface. If it is rusted, if it is not used for a long time, it is recommended to put some oil on the movable parts such as the thimble and the pushing plate. The waterway of the mold should be fully dried, otherwise, the waterway will be rusted, and the appearance can be painted to prevent rusting.

Protection in the production process: Do not fill the injection pressure, speed and other parameters. If it is used at full load, the life will be much shorter. If there is a flash or a difficult ejection problem, it should be disassembled and checked in time, so as to avoid the expansion of the problem.

Toilet Cover Mould

1. Kelong's gas-assisted toilet cover mould adopts needle valve feeding, which can accurately control the feeding position.

2. The design of multiple water channels in the mould can better improve the Mould temperature and facilitate product injection Moulding.

3. The slider is nitrided to prolong the life of the slider.